1. First, create a new image 2x2px and using the Pencil Tool (set to 1px), draw image as you can see it below. Try to Zoom In ( View -> Zoom In ) to do it easier. Define your pattern ( Edit -> Define Pattern ) and close the image 2. Open two images. One you want to hide and the other you want to hide first in. In my example, I took to hide recycle logo in Leonardo da Vinci portrait. 3. Create a new image the same size as your other two images and paste both your images onto it. The two images should be on two separate layers. Move the cover image layer above the hidden image layer. Create a new layer and move it above the hidden image layer but below the cover image. Fill ( Edit -> Fill ) this layer with the pattern you made in Step 1. Change the Blending Mode of this layer to "Exclusion". 4. Change the Blending Mode of this layer to "Exclusion". 5. Click on the image you want to hide on the Layer palette, and nvert the colors, by going "Image -> Adjustments -> Invert (or press Ctrl-I)" 6. Change to opacity of the cover image to change how well you can see the hidden image (Recycle logo), I used 70% opacity.First, create a new image, 200x200 pixels and fill the background with white. Create a new layer [Shft+Ctrl+N]. Then; use the Rectangular/Elliptical Marquee Tools [M] to create any shape you want. Now we need to select our shape. Do it by holding Ctrl and clicking on this layer with the left button of your mouse. The next step is to add layer mask to our shape. Click on button, this willadd layer mask. Then, deselect the layer [Ctrl+D]. On the top toolbar, go to Filter| Blur | Gaussian Blur... The window with options will open; select the value of the Radius that will make your shape smooth. I used 4.0. To make our job easier, we need to make our layer mask visible. Do it by holding Alt and clicking on the layer mask with the left button of your mouse. Now, we need to adjust levels of our image. To do it go to Image | Adjust | Levels... The window with options will open and you will see 3 triangles. Use your mouse to drag all of them to the center and you will notice that your shape will start to look smooth. Play around with different triangle positions to get the result you want.

In this example we will take picture of the Planet Earth (round), and reshape it into a Square! 1. First, open starting image. In this case, I'll reshape picture of our Planet EarthOne of the things i will do is to play with a shadows a little, so to give our object sense of dimensionality. 2. Second, we will start by simple reshaping, as it is usually easiest thing to do. Go to "Filter -> Liquify" and start morphing. Don't be frustrated if it is not perfect, as it is not the point of this step, but try to make it similar to the picture below. 3. Now that we have made our basic shape, we need to take care of the second part. If you have any shiny parts on you'r picture, you should flatten them out by using "healing brush".As we do not have that type of problem, we can move to next step. 4. Here, it will be helpfull if you draw you'r square outlines on new layer on top of original picture, as to give you some guide in future steps.Also, don't worry if the picture doesen't fit perfectly into the square. 5. Now this step is going to further emphasize the role of light in completing the cubed effect. Using the guide layer above, get the polygonal lasso and select a single face of the cube as shown.Next get the eye dropper and take a midtone color from that area. Next get the paint bucket tool and fill in the selected area on a new layer above the Planet earth. Do the same for each face on the cube. As you usually don't need to blur top face, you can go to "Filter -> Blur -> Gaussian Blur". When you are done blurring change the layer mode to "Overlay" and this will allow the detail of the image to show through while maintaining your adjustment to the light. Final step is to load the image back into the Liquify Filter and adjust the cube once more so that all of the faces fit the dimension of a cube. After that, you can see the final result! Excellent!

Digital art is a fun thing to experiment with, you have all probably sometime seen picture that is entirely made of text. Here's how to do it... 1. Go to "Image -> Adjustments -> Threshold", and move the slider left or right, untill you get satisfying picture... 2. Open the notepad, and type the words you want ito it like this: 3. Next, copy that text, and paste it in new text layer you have created. After that, set up style and size of font, and rotate text untill you are satisfied. 4. Next, right click on text layer, and click "Resterise Layer". Select the template layer and with the magic wand at a tolerance of 32 select the white area. Go to select>similar to select all of the light areas and then select the text layer from the layers palette. Next select text layer, and hit delete to clear the excess text and drag the template layer into the bin icon. Back the image up in white by making a new layer (Go to "Layer -> New Fill Layer -> Solid Color") with a white fill and dragging it underneath the text layer.

While you are running though photos you may find one that you absolutly hate becuase of the acne, well there is a way to cure that by touching up your photo. First open your photo which you want to cure the acne on. Next, click on your "Healing Brush Tool" and set your brush to the size of 5px for this tutorial. When selecting your brush size, set your "Hardness" to 100% and your "Spacing" to 25%. Now press Alt+Click The Mouse over a non-blemished area and then clicked over the blemished area to replace it. To clear up areas where two distinct colors of acne are near, set your "Hardness" to 66% so you can blend the areas more naturally. Next, click on Layer > New Adjustment Layer > Hue/Saturation to balance the colors. I increased the Hue slider by 12 points to even out the reddish blemishes.

when you are creating photo effects you can change the color of a photo without acutally selecting the color. At the botton of the layer palette click at the icon - create a new fill or adjustment layer(a ball half white/half black) and choose Hue/Saturation. At the Hue/Saturation window, choose any color at the edit, as an example yellow; Point at the image, with the eyedropper, the color that do you want to change. Move the Hue slider and choose a color. Now , with the shift key, fix the color(eyerdropper +) where the changed was not good .......... click OK. With the mask active, paint with the brush(with the set foreground black) where is no good(at that example the face and arms).

While texturing you can add cool looking scan lines to your picture. This is easy enough: Open Photoshop and click on File > New and set the width to 1 pixel, the height to 3 pixels and set the "Contents" section to "Transparent" for this tutorial. You will have to click on View > Zoom In a few times so you can see the palette.Now, right click on the "Brush Tool" and select the "Pencil Tool" and at the top of the screen set your "Brush " to 1px, your "Mode" to normal and your "Opacity" to 100 percent. Take your "Pencil Tool" and click in the center of your new palette so the top and bottom third are still transparent. Go to Edit > Define Pattern and save your new image as a scan line pattern like the example below. Next, open any photo you want to add scan lines to. Click on the "Rectangular Marquee Tool" and drag it over the photo. Now right click on the photo and click on "Fill" and set your properties to the image below. The "Custom Pattern" will be the one you just created. You can set your "Blending" options to what appears best for your photo.

Images on layouts are just as important as the layout itself. A fun one to would be the Alert Icon: Project09 tutorials photoshop Alert Icon Step 1 Create a new layer, and select the polygonal lasso tool. Draw a triangle as shown on the left. When you have the selection, smooth it by 6. Step 2 Set the foreground color to #FFEB90 and the background to #FF7131. Select the gradient tool, then choose the radious mode. Click and drag from the top to bottom inside the selection, using the gradient tool. You should see something similar to mine on the left. Step 3 Open up the layer styles box for layer 1. Add an inner shadow with these settings... Blend Mode: Overlay Color: Black Angle: -90 Distance: 2 size: 1 Leave the rest of the settings as default. Step 4 Add an outer glow with these settings... blend mode: normal opacity: 33% size: 9px Spread: 0 Add an exclamation mark using the text tool. Set the color to black, the to size to 48, and set the font to Times New Roman. That will give us a nice thick character. Open the layer styles box for the text layer and add outer glow with these settings... Blend mode: normal opacity: 13% spread: 25 size: 8 Step 5 Create a new layer. Select the rectangular marquee tool and set it to subtract. Cut the previous selection in half, leaving the top half. Contract the selection by 2 then smooth it by 4. Fill it with #ffffff (white) and set the opacity of the layer to 54%. Step 6 Deselect the selection by pressing ctrl+d. Create a new layer. Hold down your ctrl button and click the first layer we made, in the layer palette. This should create a selection around our triangle. Make sure your still on the top layer, which we just created. Set the foreground color to black and stroke the selection, this will create our border. Congratulations! Your finished!

Internet Products on our marketplace

Did you enjoy the article? Want to find out more on learning photoshop fast and get a free report ? This article is available as a unique content article with free reprint rights.