Raised ink printing for business cards have been a popular standard high quality method of printing offered for over 50 years. This type of printing, also called raised thermographic printing, allows the ink on the paper to rise up and harden so one can feel it sticking up on the paper. This raised ink feeling is thought to give a memorable higher quality feeling to what would normally be a flat printed surface.

To produce the raised ink a powdered polymer is dispensed to the printed ink before drying of the ink. Afterward as the ink is dried the ink that has the powder trapped dries with a raised impression of thickness over the flat paper surface. Occasionally, it is wanted to have only a share of the ink raised. Therefore, some of the ink is dried previous the powder being dispensed. This segment of the ink will stay flat. It is the segment of the ink that is not dry as the powder is dispensed that will be induced to have a raised touch.

Lots of times, raised ink printing is kept restricted to a solitary color. Further colors adds to the intricacy of the printing course. If two colors in a design must be printed extremely close each other, this will regularly cause a further handling fee for the tighter registration needed for processing. If a design requires 3 or extra colors it usually causes exorbitant costs from increased intricacy in the printing process.

One choice to analysis additionally to a hunger as further color is the reason of a colored wallpaper take. This must be reviewed methodically because ink colors will illustrate a change on assorted colored backgrounds. Choices on colors, thickness, and texture of paper media provide an extremely large sum of choices for designing one's card.

Another option which can add complexity and cost to the raised ink printing process is whether a design requires the ink to be printed to the edge of the card. When the design requires the ink to extend to the edge of the card it is called a full bleed to that edge. This also causes additional handling difficulty in the process which is usually covered again by optional additional costs for each side of the card the printing ink must come in contact with.

In the last couple of years there has been the development of a full color option to the raised ink process. Business cards can now be printed with full color plus full bleed on the front of the card and all the ink be raised. For example, you could use a full color photo to cover the front of the design and make it all raised. At this time this is only offered on heavy white glossy paper stock, but it certainly extends the options for thermographic raised ink designs.

This should provide you a brief study of the raised ink printing procedure. So with this information you should be ready to proceed to use your creativity and make raised ink business cards that brand your business image for success.

Business Products on our marketplace

Visit Galleria Ventures to take advantage of their free design services for raised ink printing of your business cards. Also find out more about their new full color raised ink printing.